Watlow Electric ANAFAZE SYSTEM 32 Podręcznik Użytkownika Strona 32
- Strona / 95
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
22 ANASOFT User’s Guide
General Screen
•
Type the new desired value into the new value box.
•
Press Enter. The new value will be displayed over the original one,
and will be downloaded to the controller. If you made a mistake in
entering the value and have not pressed Enter yet, use the back-
space key to correct.
•
Use the F4 Key to enter the Job Setup screen and save the changes.
If you don’t, upon a new start up, the Job data file will be read from
the disk along with the old parameter.
NOTE
The new value is sent first to the respective controller.
The display changes only after the controller accepts
the new value. This may cause a slight delay after
entry, especially on slow computers or when a large
number of controllers is connected.
Print Screen
•
You can print all ANASOFT screens on an IBM graphics compati-
ble dot matrix printer.
•
Use the PRTSC key. When the print screen is initiated, the copy of
the current screen is transferred to a buffer and the screen will be
printed as a background task. The program continues operating and
you can display other screens while printing a screen.
•
When printing the Trend Plot screen, you will be asked for a title
before printing the screen.
- User’s Guide 1
- Warranty 2
- Contents 3
- Appendix C: ANASOFT-RS 69 5
- Glossary 75 5
- Overview 7
- System Block Diagram 8
- Parts List 8
- 10
- Introduction 11
- ANASOFT Versions 12
- Computer Requirements 12
- Installation 15
- File Locations 16
- Hard disk systems: 17
- Installation Program 17
- Installation Menu 18
- Number of loops 19
- Directory Paths 19
- Job/Parameters path 19
- Data logging path 19
- Alarm logging path 20
- Software Key Installation 20
- Grouping Loops 20
- Group menu 21
- General grouping rules 21
- Grouping example 21
- Start Up 23
- Start Up Sequence 24
- Default Start Up Values 25
- Start Up Errors 26
- Memory allocation errors 26
- Disk file errors 27
- Software key problems 29
- Communications problems 29
- EPROM version error 30
- General Screen Displays 31
- Print Screen 32
- Loop Overview 33
- Function Keys 35
- Getting Here 37
- Loop Setup 39
- Parameters 40
- Loop graph display 40
- Input and Output parameters 41
- Input type 42
- 34 ANASOFT User’s Guide 44
- System Setup 45
- System Errors 46
- System Software 47
- Passwords 48
- System Parameters 49
- Video control 49
- Alarm display screen 49
- Controller parameters 50
- System Terminate 51
- System Start Up 52
- Normal start up action 53
- Power failure recovery 53
- Data Logging 54
- Controller Comm 55
- Digital Output Polarity 56
- Aim Fail Output (MLS only) 57
- 48 ANASOFT User’s Guide 58
- Job Setup 59
- 50 ANASOFT User’s Guide 60
- View Alarms 61
- Alarm Screen Auto Switch 62
- Audible Alarm 62
- Trend Plot 63
- Trend Plot Setup Screen 64
- Print Trend Plot Screen 66
- Appendix A: PID Tuning and 67
- On/Off Control 68
- Proportional Control 68
- Control Outputs 70
- Digital Output Control Forms 70
- Time Proportioning (TP) 71
- Analog Outputs 71
- Output Digital Filter 72
- Reverse and Direct Action 72
- Integral Term (TI) Settings 74
- Derivative Term (TD) Settings 74
- Proportional Band Only (P) 75
- PI with Derivative (PID) 75
- 66 ANASOFT User’s Guide 76
- Appendix A: PID 76
- Appendix B: Input Scaling 77
- Example 2: 78
- Appendix C: ANASOFT-RS 79
- Hardware Requirements 80
- Profile Assignment Screen 80
- Profile Edit Screens 81
- R/S Time Base 83
- R/S Loop Face Plate Display 83
- Power Failure Recovery 84
- Glossary 85
- 84 ANASOFT User’s Guide 94
- ANASOFT User’s Guide 85 95
Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Watlow Electric ANAFAZE SYSTEM 32
(4 strony)Belkin The input devices user manuals
Starting on F
Komentarze do niniejszej Instrukcji